Hengstler eXtendo X-80 - GS B + [N] Black-On-White Reversed Printing Specification

eXtendo
®
Em ulation Command Set Reference
Part No. D 684 112 Mod.Nr. 4 150813 LEV Page 16 of 95
2.1.8 GS B + [n] Black-on-white reversed printing
specification
[Name] Black-on-white reversed printing specification
[Function] This command enables and disables black-on-white reversed printing.
[Code] [1D]
16
+ [42]
16
+ [n]
[29]
10
+ [66]
10
+ [n]
[Description]
1. The “GS B + [n]” command enables or disables black-on-white (reversed) printing.
2. Permissible values of [n] are “0” and “1”.
3. If n = 0, black-on-white reversed printing is off. If n = 1, black-on-white reverse printing is on.
4. The default value for [n] is “0”.
5. The command can be used in all character modes and all character sets.
6. The line-spacing (line pitch) area does not appear in reverse format.
7. A single text-line can contain both normal printed characters and reverse printed characters.
8. No character spacing (except for character blanks, e.g. tabs, margins), appears reversed.