Hengstler eXtendo X-80 - ESC A+[N] Line Spacing Setting

eXtendo
®
Em ulation Command Set Reference
Part No. D 684 112 Mod.Nr. 4 150813 LEV Page 19 of 95
2.1.11 ESC A+[n] Line spacing setting
[Name] Line spacing setting
[Function] This command sets the line spacing to a specific amount of dot lines.
[Code] [1B]
16
+ [41]
16
+ [n]
[27]
10
+ [65]
10
+ [n]
[Description]
1. The “ESC A+[n]” command sets the line spacing to [n] dot lines.
2. Condition [0]
10
≤ [n] ≤ [255]
10
must be satisfied.
3. If this command is set two or more times for the same line, the last set line spacing is valid.
4. When line pitch is set with the “ESC 3” or “ESC 2” command, the line spacing set with this
command is invalidated.
5. Please note that “line spacing” is defined as the distance from the bottom of one character line to
the top of the next character line. Note the difference between line pitch and line spacing:
LINE 1
LINE 2
Line
Spacing
Line
Pitch