Hengstler eXtendo X-80 - ESC Sp+[N] Character Spacing Specification

eXtendo
®
Em ulation Command Set Reference
Part No. D 684 112 Mod.Nr. 4 150813 LEV Page 21 of 95
2.1.13 ESC SP+[n] Character spacing specification
[Name] Character spacing specification
[Function] This command specifies the character spacing in dots.
[Code] [1B]
16
+ [20]
16
+ [n]
[27]
10
+ [32]
10
+ [n]
[Description]
1. The “ESC SP+[n]” command specifies the spacing between characters in dots.
2. Parameter [n] specifies the number of blank dots between adjacent characters.
3. Condition [0]
10
≤ [n] ≤ [32]
10
must be satisfied.
4. Initially the value for [n] is [0]
10
(no character spacing).