Hengstler eXtendo X-80 - Installing eXtendo Paper Guides

eXtendo
®
Em ulation Command Set Reference
Part No. D 684 112 Mod.Nr. 4 150813 LEV Page 23 of 95
2.1.15 ESC ‘E‘+[n] Bold characters enable/disable
[Name] Bold characters enable/disable
[Function] This command enables/disables bold character printing
[Code] [1B]
16
+ [45]
16
+ [n]
[27]
10
+ [69]
10
+ [n]
[Description]
1. The “ESC ‘E‘+[n]” command enables or disables bold character printing.
2. Bold characters are enabled when parameter [n] = [1]
10
, and disabled otherwise.
3. Condition [0]
10
≤ [n] ≤ [1]
10
must be satisfied.
4. The default value for [n] is [0]
10
(bold characters disabled).