Hengstler eXtendo X-80 - Optimizing eXtendo Printer for Low Current Operation; Reducing Current Draw via Print Speed

eXtendo
®
Em ulation Command Set Reference
Part No. D 684 112 Mod.Nr. 4 150813 LEV Page 30 of 95
2.1.20 ESC [F1]+[01]+[03]+[0A]+[n] Page length setting
[Name] Page length setting
[Function] This command sets the page length to a specific length.
[Code] [1B]
16
+ [F1]
16
+ [01]
16
+ [03]
16
+ [0A]
16
+ [n]
[27]
10
+ [241]
10
+ [01]
10
+ [03]
10
+ [10]
10
+ [n]
[Description]
1. The “ESC [F1]+[01]+[03]+[0A]+[n]” command sets the page length to a specific length, in mm.
2. Parameter [n] represents the page length in 1/10 mm. (For example, “1234” = 123.4 mm.)
3. Parameter [n] is a 16-bit, unsigned integer with a valid range up to 65,535. It is therefore possible
to represent a length of approx. 6.5 meters of paper (approx. 21 feet). Care should be taken to
avoid the paper wasted associated with accidentally setting the page length so long.