Hengstler eXtendo X-80 - ESC a [N] Horizontal Alignment Command

eXtendo
®
Em ulation Command Set Reference
Part No. D 684 112 Mod.Nr. 4 150813 LEV Page 40 of 95
2.1.29 ESC a [n] Horizontal Alignment Command
[Name] Horizontal Alignment Command
[Function] This command is used to set the alignment mode for printing objects such as text,
wide text, bitmaps, images and barcodes.
[Code]
[1B]
16
+ [61]
16
+ [n]
[27]
10
+ [97]
10
+ [n]
[Description]
1. Command “ESC a [n]” is used for setting the alignment mode for printing objects such as text,
wide text, bitmaps, images and barcodes.
2. Parameter [n] defines the alignment setting, as follows:
0 Left alignment - Paper left + left margin
1 Center alignment - Paper center
2 Right alignment - Paper right.
3. The horizontal alignment setting will automatically reset the current reference position to the left,
center or right of the paper.
4. The set position command “ESC ‘$’ [n1] [n2] [m1] [m2]” can be used to align one or more objects
in relation to this reference position.
5. The default horizontal alignment setting is left.
6. The horizontal alignment setting has no influence on graphic printing.