Hengstler eXtendo X-80 - ESC @ Printer Reset (Software)

eXtendo
®
Em ulation Command Set Reference
Part No. D 684 112 Mod.Nr. 4 150813 LEV Page 45 of 95
2.1.34 ESC @ Printer reset (software)
[Name] Printer reset (software)
[Function] This command initializes/resets the printer.
[Code] [1B]
16
+ [40]
16
[27]
10
+ [64]
10
[Description]
1. The “ESC @” command resets the printer settings to their default values.
2. “Default” is defined as the status of the printer after initial power up.
3. The “ESC @” command prints the data contained in the print buffer before resetting.