Hengstler eXtendo X-80 - ESC [F0]+[04]+[01]+[N] Repeat Graphics Line

eXtendo
®
Em ulation Command Set Reference
Part No. D 684 112 Mod.Nr. 4 150813 LEV Page 67 of 95
2.1.48 ESC [F0]+[04]+[01]+[n] Repeat graphics line
[Name] Repeat graphics line
[Function] This command automatically reprints the previously printed graphic dot line a
specified number of times.
[Code] [1B]
16
+ [F0]
16
+ [04]
16
+ [01]
16
+ [n]
[27]
10
+ [240]
10
+ [04]
10
+ [01]
10
+ [n]
[Description]
1. The “ESC [F0]+[04]+[01]+[n]” command automatically reprints the previously printed graphic dot
line a specified number of times.
2. The parameter [n] specifies the number of times that the previous dot line will be reprinted. The
valid range for [n] is [0]
10
≤ [n] ≤ [255]
10
.
3. If n = 0, the previous dot line will not be reprinted.