Hengstler eXtendo X-80 - Important Information and Safety Instructions; General Operating Information and Disclaimers; System Safety Symbols and Warnings

eXtendo
®
Em ulation Command Set Reference
Part No. D 684 112 Mod.Nr. 4 150813 LEV Page 8 of 95
2 Printer Command Overview (Emulation)
Each command is explained using the following conventions:
[Name] Command name
[Function] Function of command
[Code] Control code represented in hexadecimal or decimal notation.
[X]
16
Hexadecimal notation (‘0’..’9’, ‘A’..’F’)
[X]
10
Decimal notation (‘0’..’9’)
[X]
2
Binary notation (‘0’..’1’)
[Description] Explanation of command function
2.1 Emulation Command Set
The following commands are used when communicating with the printer controller. All other
commands are ignored