eXtendo
®
Em ulation Command Set Reference
Part No. D 684 112 Mod.Nr. 4 150813 LEV Page 82 of 95
3 List of character sets
The following character sets are available:
• Internal 8X16 character set
• Internal 12x24 character set
• Internal 16x32 character set
• Internal 20x40 character set
• External 8X16 character set
• External 12x24 character set
• External 16x32 character set
• External 20x40 character set
• Wide 24X24/20X20 character set
• Wide 20X20 character set
Notes:
• The internal character sets are part of the firmware and are loaded into flash memory during
firmware upload.
• Although all internal character sets are regarded to be fixed font, a modified set can be integrated
in the firmware binary and made effective through upload.
• The external character sets can be uploaded into the flash memory with the appropriate
commands.
• The internal character set is also called the “primary font”.
• The external character set is also called the “secondary font”.
3.1.1 Internal 8x16 character set
The internal 8X16 character set has 256 characters, whereas the size of each character is:
• Width: 8 dots
• Height: 16 dots
The top row characters 0 to 31 ([1F]
16
) are control characters and are not used.
00-1F
20-3F
40-5F
60-7F
80-9F
A0-BF
C0-DF
E0-FF
0-31
32-63
64-95
96-127
160-191
192-223
224-255
decimal hexadecimal
To Next Page
Loading...
