HENNESSY INDUSTRIES Coats Rim Clamp X-Model Series User Manual

READ these instructions before placing unit in
service. KEEP these and other materials delivered
with the unit in a binder near the machine for ease
of reference by supervisors and operators.
Parts Identification
1601 J. P. Hennessy Drive, LaVergne, TN USA 37086-3565 615/641-7533 800/688/6359 www.ammcoats.com Manual Part No.: 85607317 00
HENNESSY INDUSTRIES INC. Manufacturer of AMMCO
®
, COATS
®
and BADA
®
Automotive Service Equipment and Tools. Revision: 12/11
* 7665 Shown
50/60/70 and X-Model Series
Rim Clamp
®
Tire Changers
For servicing single piece automotive
and most tubeless light truck tire/wheel
assemblies.
Any other type, including tube type and agricultrual, require
special handling. Tires identifi ed as truck tires need to
adhere to OSHA standard 1910.177.

HENNESSY INDUSTRIES Coats Rim Clamp X-Model Series Specifications

General

Brand	HENNESSY INDUSTRIES
Model	Coats Rim Clamp X-Model Series
Category	Tyre Changers
Language	English

Summary

Chassis System

BL Arm Assembly

Inflation Bracket and Tower Assembly

Swing Arm Assembly

Foot Pedal Assemblies

Electric Model Foot Pedal Assembly

Details for electric foot pedal operation and parts.

Air Model Foot Pedal Assembly

Table Top and Shaft Housing Assembly

Robo Arm Assembly

Inflation Guard Assembly - 6065, 7665

Valve Assemblies

Bead Loosener Arm Valve Assembly

Valve assembly for bead loosener arm.

Robo Arm Valve Assembly

Valve assembly for Robo Arm.

Air Motor Pedal Valve Assembly

Valve assembly for air motor pedal.

Table Top Clamp Pedal Valve Assembly

Valve assembly for table top clamp pedal.

Bead Loosener Arm Pedal Valve Assembly

Valve assembly for bead loosener arm pedal.

Cylinder Assemblies

BL Arm Cylinder Assembly

Cylinder assembly for BL Arm.

Table Top Cylinder Assembly

Cylinder assembly for table top.

Leverless Bead Lifter

Electrical Schematic

Pneumatic Diagrams

Rim Clamp® Tire Changer

All-Air Unit Compressed Air Requirements

Specifications for compressed air source for all-air units.

Oil Injector Maintenance

Procedures for checking and servicing the oil injector.

Transmission Lubrication

Instructions for checking and filling transmission gear oil.

Air Gauge Check and Recalibration

Steps to verify and recalibrate the air pressure gauge.

Danger, Warning, Caution, and Instructional Decals

Importance of maintaining safety decals on the machine.