3
Technical data
Voltage: Primary 115 Volt, 60Hz
Secondary max.10.5 Volt, 60Hz
Power rating: max. 25W
Secondary current: max.1.7 A
Dimensions of work surface: 14 ½”x 10 ¼” (370 x 260 mm)
Max. Cutting height: 5 ½” (140 mm)
Throat: 13 ¾” (350 mm)
Weight: 8lb (3.6kg)
For use in dry environments only
Protection class ll device
Additional safety instructions
1. Provide good ventilation, when using the device
2. Observe the material suppliers safety instructions when cutting
3. The cutting wire is hot. ** Risk of skin burn! **
4. DO NOT use the device near curtains or other combustible
materials.
5. DO NOT leave the device unattended when it is switched on.
6. Only use the supplied cutting wire or genuine Hercules® #8500
DHWT replacement wire (#6555), otherwise the transformer can
become overloaded and damage the unit.
7. Switch off the device after use.
To Next Page
Loading...