− Start up your eCAFÉ and wait for the login prompt.
− Enter “root” at the login prompt, then press the [ENTER] key.
− Enter “restore” at the command prompt, then press the [ENTER] key.
− Follow the instructions displayed on the eCAFÉ’s screen.
3. Restart your eCAFÉ:
− Turn your eCAFÉ off by pressing the ON/OFF button (hold it pressed until turn off).
− Remove the SD card from the external card reader (#1).
− Set the boot switch back to the “INT” position.
− Close the cover plate again and restart your eCAFÉ.
To Next Page
Loading...