Hercules Montfoort Cruise F7 - Checking the Quick Release

034-11592_1.0_19.11.2018
145
Maintenance
8.4.2.1 Checking the quick release
 Check the position and clamping force of the quick
release lever. The quick release lever must be flush
with the lower housing. You must be able to see a
slight impression on the palm of your hand when
you close the quick release lever.
Figure 65: Adjusting the quick release clamping force
 Use a 4 mm hexagon socket spanner to adjust the
clamping lever clamping force if required.
Afterwards, check the quick release lever position
and clamping force.
Figure 66: Adjusting the quick release clamping force
EN_034-11592_1.0_0.01_19.08.2018_HERCULES BOSCH Purion MY19_Inhalt.book Seite 145 Montag, 19. November 2018 11:00 11