Herida Healthcare Argyll II HH/P09 User Manual (English)

Questions and Answers:

M
Matthew ButlerAug 6, 2025
What to do if my Herida Healthcare Argyll II HH/P09 has no power?
- T
  Tara McguireAug 6, 2025
  If your Herida Healthcare Indoor Furnishing unit has no power, there could be several reasons. First, ensure the power plug is correctly connected and the voltage is normal. Second, check for a power cut and await reconnection, or inspect the generator if applicable. Third, examine the fuse and replace it if it's broken. If none of these steps work, the machine or system may be broken, and you should call the local distributor for repair or replacement.
S
scolemanAug 12, 2025
Why is my Herida Healthcare Argyll II HH/P09 Indoor Furnishing air mattress leaking and the alarm is sounding?
- P
  Paul DickersonAug 12, 2025
  If your Herida Healthcare Indoor Furnishing air mattress is leaking and the alarm is sounding, it could be due to a few reasons. First, check that the mattress is correctly connected to the pump by inspecting the tube connectors. Second, the air tube might be disconnected or damaged; in this case, repair the air tubes or call for a replacement. Finally, ensure the CPR plug is properly re-attached.
M
Mary KnightAug 18, 2025
What to do if Herida Healthcare Argyll II HH/P09 Indoor Furnishing mattress is too hard or too soft?
- D
  Dr. James RamosAug 18, 2025
  If your Herida Healthcare Indoor Furnishing mattress feels too hard or too soft, it's likely that the air pressure isn't adjusted to the required level. Adjust the pump pressure according to the user's weight until it reaches a suitable and comfortable level.
J
John ChangAug 25, 2025
What to do if Herida Healthcare Argyll II HH/P09 has no full inflation cycle after initialization?
- E
  Erica ValdezAug 25, 2025
  If your Herida Healthcare Indoor Furnishing doesn't complete a full inflation cycle after initialization, consider the following: 1. Check all air hoses and connectors to ensure they are properly connected and not loose. 2. Make sure the CPR is tightly connected. 3. Adjust the pressure on the pump. If the pump shows maximum pressure but full inflation hasn't been achieved, the pump likely has a problem, and you should request a repair or replacement.
S
Samuel BullockAug 29, 2025
Why does the Herida Healthcare Indoor Furnishing pump have strong vibration?
- V
  Vanessa LeeAug 30, 2025
  If the pump of your Herida Healthcare Indoor Furnishing system is vibrating strongly, it might not be properly placed. Ensure the pump is located on a flat surface or is correctly hooked onto the bed frame in a suitable position.

Herida Healthcare Argyll II HH/P09 Specifications

General

Brand	Herida Healthcare
Model	Argyll II HH/P09
Category	Indoor Furnishing
Language	English

Summary

SAFETY

General Precautions

Safety guidelines for using the equipment, including keeping away from liquids and flames, and proper storage.

WARNING

Important safety notice regarding electrical hazards if the equipment is misused or damaged.

Parts and Accessories

List of included components and optional parts for the mattress and pump system.

INTRODUCTION

Product Description

Overview of the Argyll II dynamic mattress system, its features, and design for pressure ulcer treatment.

Application

Details on patient suitability for the mattress system, including use for existing damage or prevention.

Contraindications

Specific medical conditions or physical configurations where the product should not be used.

Working Principle

Explanation of how the dynamic mattress system operates, including cell inflation and deflation cycles.

OPERATION

Static Mode

Description of the static mode operation, where all air chambers are fully inflated for procedures or transfers.

Alternating Mode

Explanation of the alternating cycle, detailing how chambers A and B inflate and deflate sequentially.

Profiled Bed Considerations

Guidance on using the mattress with profiled beds, including pressure adjustments and profile limits.

OPERATION

Installation

Step-by-step instructions for setting up the pump and mattress, including connections and initial inflation.

OPERATION

Safety Instructions

Crucial safety measures to follow during operation, especially concerning sharp objects and mattress integrity.

Pump Operation

How to operate the pump controls, including power, pressure adjustment, static mode, and lock functions.

OPERATION

System Alarms

Information on air leakage, low pressure, and power-off alarms, including their causes and silencing.

Pump Characteristics

Technical specifications of the pump, covering power, pressure range, fuses, frequency, and noise levels.

Pump Pressures

Table detailing the relationship between weight (Kg) and required pressure (mmHg) for pump settings.

Mattress Characteristics

Key specifications for the mattress model, including layers, CPR function, and maximum loading weight.

MAINTENANCE

Cleaning Procedures

Instructions for standard and severe infection control cleaning of the mattress cover, with prohibited methods.

Maintenance & Repair

Guidelines for professional maintenance and repair, emphasizing authorized personnel and genuine parts.

Service Schedule

Details on the required service intervals and instructions for competent individuals performing the service.

MAINTENANCE

Scheduled Service Checks

Aspects to be checked during annual service to maintain manufacturer's warranty and ensure safe operation.

MAINTENANCE

Storage Guidelines

Recommendations for storing the product, including ventilation, temperature, and protection from sunlight.

Transportation Guidelines

Care instructions for loading, unloading, and transporting the mattress and pump safely.

Calibration Procedure

Procedure for checking pressure tolerances using a Herida Testing System during service intervals.

Other Maintenance Considerations

Various points related to fuses, CPR toggle, mattress protection, tube integrity, and disposal.

ROUTINE CHECKS

Mattress Routine Checks

Checks to perform on the mattress, including cover, zips, connectors, fasteners, and stitching integrity.

Pump Routine Checks

Checks for the pump unit, including casing, mains lead, and testing the power fail alarm system.

WARNINGS & SYMBOLS

TROUBLE SHOOTING

Related product manuals

Herida Healthcare Argyll II

17 pages

Herida Healthcare Wiltshire II

15 pages

Herida Healthcare Ayrshire

17 pages

Herida Healthcare HH/P08

16 pages

Herida Healthcare Argyll II HH/P09 User Manual

Table of Contents

Questions and Answers:

Herida Healthcare Argyll II HH/P09 Specifications

Summary

SAFETY

General Precautions

WARNING

Parts and Accessories

INTRODUCTION

Product Description

Application

Contraindications

Working Principle

OPERATION

Static Mode

Alternating Mode

Profiled Bed Considerations

OPERATION

Installation

OPERATION

Safety Instructions

Pump Operation

OPERATION

System Alarms

Pump Characteristics

Pump Pressures

Mattress Characteristics

MAINTENANCE

Cleaning Procedures

Maintenance & Repair

Service Schedule

MAINTENANCE

Scheduled Service Checks

MAINTENANCE

Storage Guidelines

Transportation Guidelines

Calibration Procedure

Other Maintenance Considerations

ROUTINE CHECKS

Mattress Routine Checks

Pump Routine Checks

WARNINGS & SYMBOLS

TROUBLE SHOOTING

COMPANY INFORMATION

Disclaimer

Related product manuals