Volume control
By turning the knob, the chime loudness can be a adjusted. Turning the knob clockwise reduces
the volume.
Chime selector
Switch with symbols
By setting the switch to the position and the melody switch to "W" the clock will chime the
Westminster melody every 15 minutes and strike the hour after it plays the hour chime.
By setting the switch to the position and the melody switch to "W", the clock will chime the
Westminster melody on the hour only, followed by the hour strike.
By setting the switch to the position and the melody switch to "B" the clock with movement
W2114 or W2214 will strike Bim-Bam every hour and half hour.
By setting the switch to the position and the melody switch to "B" the clock with movement
W2114 or W2214 will strike Bim-Bam every hour.
By setting the switch to the position and the melody switch to "A" the clock with movement
W2115 or W2215 will chime the Ave Maria melody every 15 minutes and strike the hour after it
plays the hour chime.
By setting the switch to the position and the melody switch to "A", the clock with
movement W2115 or W2215 will chime the Ave Maria melody on the hour only, followed by
the hour strike.
Mounting wall clock models
Hang your clock vertically to the desired location. If possible, your clock should be mounted on
a wall stud. Be sure that the clock will not shift on the wall when the door is opened.
Start pendulum by moving it approximately 1 1/2 inch to the left or right and releasing it. Be sure
that the pendulum can swing freely.
To Next Page
Loading...