HERO SPLENDOR i Smart - Carburetor - Idle Speed; Idle Speed Adjustment

41
6
5
0.10 mm 0.10 mm
After tightening the lock nut (6), check
for proper adjustment of clearance.
Throttle Controlled Ignition System
(TCIS)
Throttle position sensor switch (3) alters the
ignition timing as per the throttle operation
and ensures optimum driving performance.
2
3
Never adjust air screw (2). Air screw
adjustment is to be done only by
Authorised Hero MotoCorp workshop. If
air screw is tampered it affects the overall
performance characteristics of the vehicle.
CAUTION
(1) Throttle stop screw
(2) Air screw
(3) Throttle position
sensor switch
(A) Decrease r/min
(B) Increase r/min
park
R/MIN