EasyManua.ls Logo

HESHBON HL-26K User Manual

HESHBON HL-26K
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Please read this manual before you get started.
You must read and understand the precautions for safety purposes and any damages that may
occur to your property.
HESHBON 2 POST LIFT
Installation/Operation & Maintenance Manual
HL-26K
Question and Answer IconNeed help?

Do you have a question about the HESHBON HL-26K and is the answer not in the manual?

HESHBON HL-26K Specifications

General IconGeneral
BrandHESHBON
ModelHL-26K
CategoryLifting Systems
LanguageEnglish

Summary

Introduction to Heshbon 2 Post Lift

Key Features and Characteristics

Details lift features like upper limit protection, remote control, cable adjustment, cylinders, and arm lock gears.

Component Descriptions

Illustrates and lists all major components of the 2-post lift.

Control Panel Functions Overview

Details the operation of the main power lamp, switch, and ascent button.

Technical Specifications

Provides model details, capacity, pressure, height, stroke, and power.

Safety Guidelines for Operation

General Danger Warnings

Critical safety alerts regarding physical hazards like coming under the vehicle or overloading.

Pre-Operation Safety Checks

Emphasizes trained personnel, correct vehicle balancing, and safe operating environment.

Operational Safety Guidelines

Covers safe practices during lift operation, including personnel, environment, and equipment handling.

Equipment Safety and Power Management

Focuses on checking safety devices and proper power disconnection during idle periods or storms.

Installation Procedures

Installation Site Requirements

Covers site flatness, floor depth, load capacity, and temperature conditions for installation.

Installation Site Layout and Clearance

Details required dimensions, spacing from walls, and ceiling height for safe setup.

Post Installation Procedures

Includes setting up posts, anchor bolts, hydraulic hose connection, and cylinder bleeding.

Cable Synchronization and Adjustment

Covers cable setup, synchronization, and tuning for smooth carriage movement.

System Diagrams

Provides hydraulic and electric line drawings for system understanding.

Operating the 2 Post Lift

Pre-Operation Checks

Verifying lift readiness through test operation, switches, hydraulics, and mechanical components.

Vehicle Loading Procedure

Steps for positioning arms, entering the vehicle, and adjusting pick-up pads.

Lift Operation and Vehicle Removal

Procedures for ascending, performing repairs, and safely lowering the vehicle.

Arm and Pad Specifications

Details on telescopic arm lengths and multi-stage pad adjustments.

Maintenance and Troubleshooting

Lubrication and Cleanliness

Procedures for lubricating moving parts and maintaining a clean workspace and lift components.

Cable Synchronization and Arm Inspection

Adjusting sync cables and performing annual arm condition checks.

Emergency Procedures and Power Pack

Manual lowering during power failure and checking power pack pressure settings.

Hydraulic System Maintenance

Schedule and steps for changing hydraulic oil and checking the pump filter.

Troubleshooting and Periodic Checks

Diagnosing common faults and outlining a schedule for regular maintenance tasks.

Related product manuals