EasyManua.ls Logo

Hessaire MC91 - Initial Getting Started Guide; Contents and Tools Required; Pre-Operation Inspection

Default Icon
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
Getting started
Inspection:
After unpacking your evaporative cooler, carefully inspect for any damage that may have
occurred during transit. Inspect for loose, missing or damaged parts.
Tools / Materials
Needed:
Drill with #2
Phillip’s bit
Or Phillip’s head
screwdriver
Use all precautions and
disconnect from power source
before performing any
maintenance.
Operating Instructions
Evaporative cooling works on the principle of heat absorption by moisture evaporation.
Simply put, heat is removed from the air as water evaporates. You feel this principle in
action when you step out of a swimming pool or shower and feel cool as water evaporates
from the surface of your skin.
Your evaporative cooler works on the same principle. The fan pulls hot outside air through
the wet cooling pads, where the air is cooled by evaporation and then discharged from the
cooler.

Related product manuals