Non Contact Infrared Body
Thermometer
Instructions for use
15
EMC Declaration
1) This equipment needs to be installed and put into service in accordance with the information
provided in the ACCOMPANYING DOCUMENTS;
This product needs special precautions regarding EMC and needs to be installed and put into
service according to the EMC information provided, and this unit can be affected by portable
and mobile RF communications equipment.
2)* Caution: Do not use a mobile phone or other devices that emit electromagnetic fields, near
the unit. This may result in incorrect operation of the unit.
3) *Caution: This unit has been thoroughly tested and inspected to assure proper performance
and operation!
4) * Caution: this machine should not be used adjacent to or stacked with other equipment and
that if adjacent or stacked use is necessary, this machine should be observed to verify normal
operation in the configuration in which it will be used.
Guidance and manufacture’s declaration – electromagnetic emission
The Non Contact Infrared Body Thermometer is intended for use in the electromagnetic environment specified
below. The customer of the user of the Non Contact Infrared Body Thermometer should assure that it is used
in such an environment.
Electromagnetic environment – guidance
The Non Contact Infrared Body Thermometer use
RF energy only for its internal function. Therefore,
its RF emissions are very low and are not likely to
cause any interference in nearby electronic
equipment.
The Non Contact Infrared Body Thermometer is
suitable for use in all establishments, other than
domestic and those directly connected to the public
low-voltage power supply network that supplies
buildings used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
To Next Page
Loading...
