6.2 Calibrate the Gyro
0 0
O
Push two levers down to 450 as picture shows, the indicator light on drone will
blink and turn solid that indicates the calibration is completed.
A To ensurea stableflight, we suggestthat the pilot calibratesthe gyro every
time after pairing the drone and after a crash.
6.3 Unlocking / Locking the motors
Unlocking the motors: As the show above,move the Left Control Stick to lower
left in 450 and the Right Control Stick to lower right in 450 at the same time until
four rotor blades start rotating.
Locking the motors: Repeat this operation, the motors will stop immediately.
06
To Next Page
Loading...