hi-Fun Hi-Ring mini - Switch On and Pairing; Switch On Procedure; Bluetooth Pairing Mode

Switch on
To switch on hi-Ring mini Bluetooth hold the middle button
(3) until warning LED (1) comes on violet. Afterwards
hi-Ring mini Bluetooth automatically connect itself to the
last paired device, if available, and LED ash in blue to
conrm the connection. If there is no available paired
device or if it is out of reach of hi-Ring mini Bluetooth,
it turns off in about 4 minutes in order to avoid battery
dischargnig.
Pairing
To pair for the rst time, pair for a second time or to pair
to a different device, hi-Ring mini Bluetooth must be set
in pairing mode, signaled by the warning LED (1) which
ashes alternately and quickly in red and blue. To activate
the pairing mode you need to switch off hi-Ring mini
Bluetooth and switch it on holding the central button (3)
until the warning LED (1) will ash alternately and quickly
red and blue.