Hi-Target HTS-420R - Page 109

Total Station Manual
- 108 -
Known
P0 First known point
P1 Second known point
Unknown
a Direction from P0 to P1
S Slope distance between P0 and P1
d1 Horizontal distance between P0 and P1
d2 Height difference between P0 and P1
Steps
key
Display
○
1 In the [Traverse &
Inverse] screen,
press [F1] or [1] to
enter the Inverse
subapplication.
[F1]
or
[1]
F1
[Traverse&Inverse]
F2
偏置模式 : 偏置模式 :
F1 Inverse (1)
F2 Traverse (2)
○
2 There are four
ways to get the
known point for
inverse calculation.
A: Input the name of
known point in“Pt.”
field in [Traverse]
screen and press
[F1](Meas.) entry the
[COGO Meas]
Input prism height in
the “T.H.” field on
[COGO-Meas], then
aim the prism and
press [F1](ALL) or
[F2](DIST) + [F3](REC)
to measuring and
saving the point for
inverse calculation.
Input point
name
+[F1](Meas.)
[F1](ALL)
Or
[F2](DIST)
+
[F3](REC)
A: Get the known point by COGO-Meas
Meas.
[Inverse]
Result Find ↓
偏置模式 :
PT6
Input data!
From ：
To ：
List Coord. ∣←
COGO-Meas.
ALL
[COGO-Meas]
DIST REC EDM
PT6
Pt. ：
T.H. ： 1.500 m
HA ： 153°15′10″
VA ： 22°35′40″
： -----.--- m
1