Hi-Target HTS-420R - Page 112

Total Station Manual
- 111 -
Steps
key
Display
○
1 In [COGO Menu]
screen, press the [F2]
or number key [2] to
enter the [Intersection]
screen. Then press [F1]
or [1] to enter the
BRG-BRG
subapplication.
[F2]
or
[2]
[F1]
or
[1]
F1 F2 F3 F4
偏置模式 : 偏置模式 :
F1
[COGO Menu]
F2 F3 F4
偏置模式 : 偏置模式 :
F1 Traverse&Inverse (1)
F2 Intersection (2)
F3 Offsets (3)
F4 Extension (4)
F1
[Intersection]
F2 F3 F4
偏置模式 : 偏置模式 :
F1 BRG-BRG (1)
F2 BRG-DST (2)
F3 DST-DST (3)
F4 LNLN (4)
○
2 Input the name of
first point in “PT1”
field.
※ There are four ways
to get the known
point for BRG-BRG
calculation. Please
refer to the step ②
in the “COGO
Traverse”.
Input
name of
first point
Meas.
[BRG-BRG]
Result Find ↓
偏置模式 :
8
Input data！
PT1 ：
AZ1 ： 0°0′0″
PT2 ： 9
AZ2 ： 0°0′0″
○
3 Move the focus to
“AZ1” by using [▼] and
input the first bearing
after set first point.
[▼]
+
Input first
bearing
Meas.
[BRG-BRG]
Result Find ↓
偏置模式 :
26°15′52″
Input data！
PT1 ： 8
AZ1 ：
PT2 ： 9
AZ2 ： 0°0′0″