Hi-Target HTS-420R - Bearing-Distance Intersection

Total Station Manual
- 112 -
○
4 Move the focus to
“PT2” by using [▼] to
setting second point.
[▼]
+
Set
second
point
Meas.
[BRG-BRG]
Result Find ↓
偏置模式 :
9
Input data！
PT1 ： 8
AZ1 ： 26°15′52″
PT2 ：
AZ2 ： 0°0′0″
○
5 Move the focus to
“AZ2” by using [▼] and
input the second
bearing after set
second point.
[▼]
+
Input
second
bearing
Meas.
[BRG-BRG]
Result Find ↓
偏置模式 :
75°45′20″
Input data！
PT1 ： 8
AZ1 ： 26°15′52″
PT2 ： 9
AZ2 ：
○
6 When all of the
data are entered
correctly, press
[F2](Result) to
calculate the
intersection point and
show the result.
Input the name of
result point in the
[BRG-BRG Result] and
press [F4](REC) to save
the point.
[F2]
[BRG-BRG Result]
REC
Pt. ： 10
N ： 6.369 m
E ： 3.536 m
※ In all of the above operation, press [ESC] to return to the previousmenu.
※ The result point is plane data.
11.4 Bearing-Distance Intersection
Use the bearing-distance (BRG-DST) subapplication to calculate the intersection
point of a line and a circle. The line is defined by a point and a direction. The circle is
defined by the center point and the radius. The result may be have 1 intersection
point, may be have 2 points, or may be have no one.