Hi-Target HTS-420R - Set Point Calculation

Total Station Manual
- 122 -
11.8 Set Point
Use the Set Point (Set Pt) subapplication to calculate the coordinate of a new
point in relation to a line from known longitudinal and offset distance.
N
P1
P2
P3
d1
d2
Figure 11.8 Set Point Diagram
Known
P1 Start Point
P2 End Point
d1 △Line
d2 △Offset
Unknown
P3 COGO point
Steps
key
Display
○
1 In the [Offsets]
screen, press [F2] or [2]
to enter the Set Point
subapplication.
[F2]
or
[2]
F1
[Offsets]
F2
偏置模式 : 偏置模式 :
F1 DistOff (1)
F2 Set Pt (2)