Hi-Target HTS-420R - Page 126

Total Station Manual
- 125 -
refer to the step
○
2 in
the “COGO Traverse”.
○
3 Then baseline is
defined, press [▼] key
to move the focus
down and use [◄]\[►]
Key to select base
point.
[▼]
+
[◄]\[►]
Meas.
[Extension]
Result Find ↓
偏置模式 :
8
Define line!
PT1 ： 8
PT2 ： 9
Select & Input!
Base Pt.：
HD ； 0.000 m
○
4 Then press [▼]
key to move the focus
down and input the
extension distance in
the “HD” field.
[▼]
+
Input
distance
Meas.
[Extension]
Result Find ↓
偏置模式 :
6.325 m
Define line!
PT1 ： 8
PT2 ： 9
Select & Input!
Base Pt.： 9
HD ；
○
5 When all of the
data are set correctly,
press [F2](Result) to
calculate the
intersection point and
show the results.
Input the name of
result point in the
[Extension Result] and
press [F4](REC) to save
the point.
[F2]
[Extension Result]
REC
Pt. ： A1
N ： 1.256 m
E ： 9.032 m
※ In all of the above operation, press [ESC] to return to the previousmenu.
※ The result point is plane data.