Hi-Target HTS-420R - Road Stakeout Procedure; Stakeout Methods Overview

Total Station Manual
- 136 -
○
7 Pressing [Add] can add
more vertical curve data in
road.
[F3]
Vert. curve-07
Chain :
OK
Elevat.:
Length :
Pressing [Delete] will delete
selected element. ※
1
[F2]
Vert. curve list
06 PT: 1699.888
03交点: 5467.876
Save
Delete
Add View
04交点: 6784.362
○
9 Pressing [Save] will save
road data and return back to
road menu.。
Pressing [ESC] will also save
road data.
[F1]
Road Saved!
※
1
：Cannot delete start point.
12.4 Road Stakeout
User can do road stakeout according to specific chain number and offset.
Before doing stakingout, user must define horizontal curve. If need calculating
elevation, user must define vertical curve either.
The rules of stakeout data are defined as shown below:
Offset left: the horizontal distance between left pile and center line; Right: the
horizontal distance between right pile and center line.
Elevation left(right): the vertical distance between lefit(right) pile and center line.