Hi-Target HTS-420R - Editing Fix Points

Total Station Manual
- 148 -
○
4 After finishing newing a
fixpoint, the program makes
the point plus 1 automatically
and you can continue to input
other fix points, as shown in
the picture on the right.Press
[F1] (Back) or [ESC] to go back.
[New FixPoint]
Job : JOB1
Pt. :
N : 100.000 m
E : 100.000 m
Z : 100.000 m
Back
OK
2
2.3 Edit Fix Pt.
The function can edit the fixpoints in the memory.
Steps
Key
Display
○
1 In the interface of View
FixPoint, you can find the data
of need to be edited by
pressing the direction key of
left or right or in the function
of finding. If you want to
change the job which the
point needs to be edited, you
can press [Job] to select the
target job.
[View FixPoint] 7/22
Job : JOB1
Pt. :
N : 2.000 m
E : 3.000 m
Z : 1.000 m
Find New Edit
P7
○
2 Press [F3] (Edit) to enter
the interface of Edit Fixpoint.
The screen displays the point
data. Input the new point’s
name and coordinate and
press [ENT] to move the cursor
to the next row. When the
data doesn’t need to be
edited, you can press [ENT]
directly.
[Edit FixPoint]
Job : JOB1
Pt. :
N : 2.000 m
E : 3.000 m
Z : 1.000 m
Back
OK
P7