Hi-Target HTS-420R - Deleting Measurement Data

Total Station Manual
- 151 -
press [F4] to view.
○
4 The screen starts to display
the information of
measurement data from the
first piece of data in the
job.Press the direction key of
left or right can view the
measurement point data
which match the view
condition one by one.
Pressing [PAGE] can view a
piece of measurement point
data’ other pages.
Press [Search] to back to the
interface of View Meas PT.
[View Meas Pt] 1/28
Pt. : 6
Job : DEFAULT
Type : Meas.
HA : 226°43′06″
VA : 89°26′11″
Date : 2015.05.23
Delete
Search
[PAGE]
[View Meas Pt] 1/28
Pt. : 6
: 3.009 m
: 3.456 m
: 1.718 m
T.H. : 1.000 m
Time : 10:54:16
Delete
Search
3.2 Delete measurement data
The not good and the repeating measurement data can be deleted.
The station data and the last piece of data in the data items can not be deleted.
Steps
Key
Display
○
1 After finding the
measurement point data
which need to be deleted,
press [F1] to delete.
[F1 ]
[View Meas Pt] 1/28
Pt. : 6
Job : DEFAULT
Type : Meas.
HA : 223°44′06″
VA : 88°20′11″
Date : 2015.05.23
Delete
Search
○
2 The window of program
prompts whether to delete or
not.
Press [F4] to make sure to
delete and press [F1] to cancle
the operation.
[F4]
If delete data?
Data cannot recover!
No Yes