Hi-Target HTS-420R - Page 167

Total Station Manual
- 166 -
Mil 0.005 / 0.02 / 0.05
DIst. Unit
Sets the units shown for all distance and coordinate related fields.
Meter Meters [m].
US-ftUS feet [ft].
INT-ftInternational feet[fi].
ft-in1/8US feet-inch-1/8 inch [ft].
Dist.Decimal
Setes the number of decimal places shown for all distance fields.
This is for data display and does not apply to data export or
storage.
3Display distance with three decimals.
4Display distance with four decimals.
Temp. Unit
Sets the units shown for all temperature fields.
℃Degree Celsius.
℉Degree Fahrenheit.
Press.Unit
Sets the units shown for all pressure fields.
hPAHecto Pascal.
mmHgMillimeter mercury.
inHgInch mercury.
Code Record
Sets if the codeblock is saved before or after the measurement.
Code
Sets if the code will be used for one, or many, measurements.
Rec/Reset The code is cleared after ALL or REC.
Permanent The code remains after measurements.
Auto-Off
30min Auto poweroff after 30min’s no operation.