Hi-Target HTS-420R - Adjusting Tilt X Axis

Total Station Manual
- 170 -
1.3 Adjust Tilt X
In Tools Menu, choose “1 Adjust”, and then press [F2] to enter “Adjust Tilt X”.
These are the calibaration of x-diretion of compensator’s vertical axis.
Steps
Key
Display
○
1 Level instrument,
focus on the reticle of
collimator, record the
vertical angle V0. Use
fine tuning to set
vertical angle to
V0+3’,focus on the
reticle center accurately,
wait for stable
value,press [F4](OK).
[F4]
[Adjust Tilt X]
OK
HA ：
VA ：
Tilt ：
偏置模式 :
10°12′02″
F1 up 3′
81°53′49″
-117
○
2 Use fine tuning to set
the vertical angle to
V0-3’, focus on the
reticle center accurately,
wait for stable value,
press [F4] (OK).
[F4]
[Adjust Tilt X]
OK
HA ：
VA ：
Tilt ：
偏置模式 :
10°12′02″
F1 down 3′
81°59′50″
-86
○
3 Use fine tuning to set
the vertical angle as
V0,focus on the reticle
center accurately.
○
4 Reverse the
telescope, use face right
to focus on the reticle of
collimator,record the
vertical angle V1.Use
fine tuning to set the
vertical angle as
V1-3’,focus on the reticle
center accurately, wait
for stable value,
[F4]
[Adjust Tilt X]
OK
HA ：
VA ：
Tilt：
偏置模式 :
190°25′38″
F2 up 3′
269°23′45″
96