Total Station Manual
- 17 -
Input box:
Each digit key defines 3 letters and 1 number. Depends on the properties of input
box, input process varies.
Number input box:
In number input box, user can only input numbers, include “1-9”,“.”, “-+”.
Number will appear in box when user presses the key.
Text input box:
In text input box, user can input numbers and letters. Repeat pressing same key
to get proper letter, such as A->B->C->7.
When right-bottom of screen display icon AB, user can input number/letter;
when display icon 01, user can only input number. User canpress soft-key [F4] to
switch input mode between Number and Text when input box beenactive.
Letters：
Letters that total station can input includes “A-Z/$%_@&*?!+-.”.
Arrow key ←,→ move inputing cursor.
PressingENTentersediting; pressingENT confirms input after editing.
When editing distance, angle, temperature and pressure values that containunit
format, input box’s text will convert into text without unit format. Such as angle
29°32′56″ transforms into 29.3256; Distance115.321m transforms into
115.321. When finish editing, the text will automatic convert back.
7.1 Input characters
Each digit key defines 3 letters and 1 number. In text input mode, each time
pressing the key, one character appears at cursor position. Number appears when
pressing 4 times.
Example: input 123ABV2
To Next Page
Loading...
