Hi-Target HTS-420R - Character Deletion Procedures

Total Station Manual
- 18 -
○
2 Press key 1, key 2, key
3. Then press key F4,
active text input
mode.Icon AB should
appear in right bottom
screen.
[1],[2],[3],[F4]
123|
B.S. Clear Digit
[Q-Survey] 1/3
Pt. :
T.H. :
Code :
HA :
VA :
:
1.500 m
13°29′59″
90°59′23″
10.044 m
○
3 Press key 7, display
letter ‘A’, wait about half
second, press key 7 twice,
display letter ‘B’, then
press key 2, display letter
‘V’, wait about half a
second, press key 2 four
times, display number ‘2’.
Then finished text
‘123ABV2’ input.
[A],[B],[V],[2]
123ABV2|
B.S. Clear Digit
[Q-Survey] 1/3
Pt. :
T.H. :
Code :
HA :
VA :
:
1.500 m
13°29′59″
90°59′23″
10.044 m
○
4 Press key ENT to
finish editing, cursor will
move down to next input
box.
[ENT]
123ABV2
ALL DIST REC
[Q-Survey] 1/3
Pt. :
T.H. :
Code :
HA :
VA :
:
1.500 m
13°29′59″
90°59′23″
10.044 m
7.2 Delete characters
Delete or clear input characters.
Steps
Key
Display
○
1 Press key ← to move
cursor to right side of the
character that to be deleted.
←
PTT|001
B.S. Clear Alpha
[Q-Survey] 1/3
Pt. :
T.H. :
Code :
HA :
VA :
:
1.500 m
13°29′59″
90°59′23″
10.044 m