Hi-Target HTS-420R - Point Search Functionality; Direct Point Searching

Total Station Manual
- 19 -
○
2 Press key F1(Delete).
[F1]
PT|001
B.S. Clear Alpha
[Q-Survey] 1/3
Pt. :
T.H. :
Code :
HA :
VA :
:
1.500 m
13°29′59″
90°59′23″
10.044 m
○
3 Press key ENT to confirm
input. Press Key ESC to
undo changes.
[ENT]
[ESC]
PT001
ALL DIST REC
[Q-Survey] 1/3
Pt. :
T.H. :
Code :
HA :
VA :
:
1.500 m
13°29′59″
90°59′23″
10.044 m
8. Point Search
Point search is a function used by applications to find measured or fixed points
in the jobs.。
Point search is limited to a particular job.
If several points meet the search criteria, then the results are ordered according
to the date.
8.1 Direct search
By entering an actual point number (for example ‘A1’), and pressing key SEARCH,
all points within the selected job and with the corresponding point number are
found.
Here is an example for searching fix point in function ‘Set STA’.
Steps
Key
Display
○
1 Choosing ‘Survey’ in
application menu, then
choose function ‘Set STA’.
Entering point number, for
example ‘A1’, pressing ENT to
finish input, then pressing F1
to search.
[F1]
[Set STA]
Input STA PT!
Station :
A1
Find List
Coord.