Hi-Target HTS-420R - Starting a Measurement Process; Setting Horizontal Angle (HA)

Total Station Manual
- 33 -
3. Start measurement
Q-Survey has 3 pages menu, including all measuring functions commonly used,
such as angle measurement, distance measurement and coordinate measurement.
As shown below:
A1
ALL DIST REC
[Q-Survey] 1/3
Pt. :
T.H. :
Code :
HA :
VA :
:
1.500 m
13°29′59″
90°59′23″
10.044 m
A1
ALL Code EDM
[Q-Survey] 2/3
Pt. :
T.H. :
Code :
HA :
：
：
1.500 m
13°29′59″
-0.173 m
10.110 m
A1
Zero
[Q-Survey] 3/3
Pt. :
T.H. :
Code :
N ：
E ：
Z ：
1.500 m
9.829 m
2.360 m
-0.275 m
Station
SetHA
3.1 Set HA
You can set the horizontal angle as 0 or set it as wanted angle.
Set horizontal angle to 0.
Steps
Key
Display
○
1 Aim at the target which
used to orient.Press [F4] twice
to enter third pages soft key.
[F4]
+
[F4]
A1
ALL DIST REC
[Q-Survey] 1/3
Pt. :
T.H. :
Code :
HA :
VA :
：
1.500 m
13°29′59″
90°59′23″
ALL Code EDM
Zero
Station SetHA