Hi-Target HTS-420R - Code Library Operations; Code Soft Key Functions; GSI Code Properties Overview; Soft Keys for Code Operations

Total Station Manual
- 39 -
Before REC：Record code data before recording the actual measurement data.
After REC：Record code data following after the actual measurement data.
Soft key of Code
After starting the function of soft key (Code), Screen displays the following:
[View Code] 1/5
Code :
Note :
Info 1 : AAAAAA
Info 2 : BBBBBB
Info 3 : CCCCCC
Info 4 : DDDDDD
Find New REC OK
CODEA
GSI-the introduction of code properties:
Code： The name of code
Note： The additional note
Info1： The editable information of other contents
Info8： Other information
The introduction of soft key:
[Find]: Use the name of code or wildcard to find the needed code.
[New]: New a piece of editable information of code and use it.
[REC]: Record the current code data to the job and the code data not with any
measurement point binding at this time.
[OK]: Select the current code and use it.
Using the soft key of [Code] can select the code in the code library directly, it
will back to the interface of Q-survey after selecting, the code in the edit text of Code
is the selected code.