Hi-Target HTS-420R - Selecting Fix Point from Memory List

Total Station Manual
- 61 -
2.2 Select the Fix Point in the Memory [List]
User can select the fix point in the memory's jobs to set station without
inputting the point name.
Steps
Key
Display
○
2 Press [F2](List) in the
[Set STA] screen.
[F2]
[Set STA]
Input STA PT!
Station :
A1
Find List
Coord.
○
3 Show the point list all
the fix points and measured
points of the current job.
[Find Pt.] 1/5
DEFAULT Station
View Job OK
STN1 Station
200007 Meas. PT
200008 Meas. PT
100 Target PT
Coord.
○
4 Select the needed point
through Up and Down key.
[View]: Show the
informations of this point.
[Coord.]: Input the
coordinate datas manually.
[Job]: Select datas from
another job.
↑
↓
[View]：
[View Coord.]
Job : DEFAULT
Pt. : 121
X : 0.000 m
Y : 0.000 m
Z : 0.000 m
Date: 20150515
OK
[Coord.]：
[Input Coord.]
Job : DEFAULT
Pt. :
N :
E : 0.000 m
Z : 0.000 m
Back OK
121
0.000 m
[Job]：