Hi-Target HTS-420R - Manual Coordinate Input for Station

Total Station Manual
- 62 -
121
Job Zero Coord. Find
[Find Pt.]
Job :
Pt. :
DEFAULT
Select job or input coord.!
○
5 After selecting needed
point, press [F4](OK) and
enter input instrument
height screen. Complete all
settings and then back to
Pre-Settings screen.
[F4]
input
instrument
height
+
[ENT]
[F4]
[Set STA]
Input I.H!
IH. :
1.400 m
Back OK
2.3 Input the coordinates manually.
Steps：
1. Press [Coord.], enter input coordinate screen.
2. Input the point name and coordinates.
3. [OK] Save the station coordinates. And then input the instrument height.
Steps
Key
Display
○
2 Press [F3](Coord.) in the
[Set STA] screen.
[F3]
[Set STA]
Input STA PT!
Station :
A1
Find List
Coord.
○
3 Input the point name
and the point’s coordinates.
After inputting one item, the
curser will move to next
input item.
Input
point
name and
coordinate
+
[ENT]
[Input Coord.]
Job : DEFAULT
Pt. :
N : 3.102 m
E : 15.012 m
Z : 4.215|
B.S. Clear Alpha
A1