Hi-Target HTS-420R - Starting Measurement Applications; Surveying Application; Stakeout Application; Free Station Application

Total Station Manual
- 66 -
Press the [PAGE] key to switch
the display of measured
values screen and backsight
inspection values screen.
[EDM]: Go to set EDM
settings.
Meas. BS
BS PT : DEFAULT1
T.H. : 1.400 m
HA : 45°00'00"
Azimuth : 45°00'00"
: 10.000 m
: 1.726 m
1.500
ALL DIST REC EDM
Meas. BS
BS PT : DEFAULT1
T.H. : 1.400 m
HA : 45°00'00"
: 10.000 m
Z : 1.726 m
1.500
ALL DIST REC EDM
○
4 Back to Pre-Settings
screen. The setting items that
have been made are marked
with *.
[Surveying]
[*] F1 Set Job (1)
[*] F2 Set STA (2)
[*] F3 Set B.S. (3)
F4 Start (4)
F1 F2 F3 F4
4. Starting the Applications
The preset applications covers a wide range of measurement tasks.That makes
the daily field measurementeasier and faster. The all applications can be selected to
use are as follows:
 Surveying
 Stakeout
 Free Station
 Tie Distance
 Area
 Remote Height
 COGO
 Road