Hi-Target HTS-420R - Surveying Application Operations

Total Station Manual
- 67 -
Steps：
1. Go to the MAIN MENU.
2. Move the focus to [Program] or press the Numeric key 2 to select and go to
the PROGRAM MENU.
3. Press [PAGE] to browse the application menu. Press [F1]-[F4] to select and
start an application.
5. Surveying
Compared with the Q-Suveying, Surveying has different guides in setting station
and set orientation.
Operation: Must first finish seting the station and orientation.
Steps
Key
Display
○
1 After finishing setting the
job, setting the station and
setting the orientation, press
[F4] to start the application in
the Pre-Setting menu.
[F4]
[Surveying]
[*] F1 Set Job (1)
[*] F2 Set STA (2)
[*] F3 Set B.S. (3)
F4 Start (4)
F1 F2 F3 F4