Hi-Target HTS-420R - Individual Point Measurement; Data Viewing

Total Station Manual
- 69 -
5.1 Individual Point
[IndivPt]：
In the data acquisition, point can be recorded individually. Press this key to
switch the screens of Individual Point Measurement and Consecutive Point
Measurement.
Steps
Key
Display
○
1 Press [F4]( ↓ ) twice to
display the last page of soft
keys.
[F4]
1
ALL DIST REC
[Surveying] 1/3
Pt. :
T.H. :
Code :
HA :
VA :
：
1.500 m
13°29′59″
90°59′23″
ALL Code EDM
ALL Data
IndivPt
○
2 Press [F2](IndivPt) to start
measuring individual point
function.
[F2]
2
ALL Data
[Surveying] 1/3
IndivPt :
T.H. :
Code :
HA :
VA :
:
1.500 m
13°29′59″
90°59′23″
IndivPt
○
3 Input the individual
point’s name and prism height
and press [ENT] to move the
cursor to next input item.. If
needed, input the code.
Input
point
name,
prism
height
and code
+
[ENT]
SP1
ALL Data
[Surveying] 1/3
IndivPt :
T.H. :
Code :
HA :
VA :
:
1.500 m
13°29′59″
90°59′23″
IndivPt