Hi-Target HTS-420R - Resection Measurement

Total Station Manual
- 87 -
○
7 Move the prism along the
arrow direction to make the
value of △ equal 0m.
In the process of staking out,
if using the Repeat
Measurement or Tracking
Measurement, the
calculation of the differences
between measurement point
and stakeout point can be
displayedin real time and
convenient.
New DIST REC Back
[Polar Stakeout]
Pt. :
Hz : *
: *
P001
0°00′00″
0.000 m
○
8 Now itfinishes staking out
a point.Repeat the previous
steps
○
2 ～
○
7 to stake out
next point.
OK
[Polar Stakeout]
Pt. :
Azimuth :
:
※
1
: The inputs of polar coordinate data won’t be saved to job.