Hi-Target iBoat BS2 - Run Virtual Serial Port Software; Setup GNSS Receiver by Hi-MAX

BS2 USV User Manual
12
2.4 Run Virtual Serial Port Software
Run installer USR-VCOM.exe and then run the program immediately. Add a new virtual serial
ports as below.
Figure2-4-1 Virtual serial port configuration
Two Virtual Serial Port configuration as follows:
Port function: GNSS connection
Virtual COM: COM3(can be customized)
Net Protocol: TCP Client
Remote IP/Addr: 192.168.1.18
Remote Port: 8000
Remarks: GNSS connection
Figure2-4-2 Connecting status
When the ports set up, The Connected will be displayed and data income increase if everything
goes well. Minimize it and keep the program running in the background.
2.5 Setup GNSS Receiver by Hi-MAX
Firstly, insert the Hi-MAX dongle (the orange color one) into the laptop, register if necessary.