V30 GNSS RTK System Manual
65
Introduction
This Section will introduce the outlook and operation for
the main ports and accessory of V30 GNSS RTK system. The
Technical Parameters will be a little different according to your
purchase order. Please make sure about your configuration
then find out Technical Parameters correspondingly.
Five-pin Port and Eight-pin Port
Figure 8-1 Five-pin Port and Eight-pin Port
Figure 8-2 Five-pin Port Eight-pin Port
1. Five-pin port: named as COM2/PW2, Generally used for
the connection between the receiver mainframe and the
external data link or the external power supply
To Next Page
Loading...
