Hi-Target ZTS-320 Series - Coordinate Mode Operations

17
2.3.3 Coordinate Mode(including three menu pages)
Page
Soft key
Reference
Function
1
F1
Save
Start coordinate measurement and record
the measured data into the selected files
(measurement file „File(.MEA)‟ or
coordinate file „File(.COO)‟ are selected
in surveying menu or by star key.
F2
Meas
Start coordinate measurement
F3
Mode
Switch between four distance
measurement mode [single accurate
measurement (sngl)/ repeated accurate
measuring (rept)/ continue measuring
(cont)/ tracking (track)]
F4
P1/3
Display the second page of the soft key
functions
2
F1
Setting
Set target height and instrument height
F2
BBS
Set coordinates of BBS (back-sight point)
and back-sight angle
F3
STA
Set coordinates for station
F4
P2/3
Display the third page of the soft key
functions
3
F1
Offset
Start offset measurement (eccentric
measurement)
F2
Stake
Stake out coordinates
F3
SetA
Set azimuth (the same as setting
horizontal angle under the Angle mode)
F4
P3/3
Display the first page of the soft key
functions