63
The connected computer may be ready to receive files when
exporting without special operations. The exported file will be in
the format of ASCII. See explanations for forms in Appendix B.
2. Export to USB
AT the USB port of instrument, Connect U disk and turn on.
Press "MENU" button to enter the menu screen, and select "
Export " to enter the menu of export file, then select "Export to
USB " , the exporting window as shown below (the file exported
is defaulted to be measurement file , and you can re-select).
Select "File" button to choose the file you want to export,
and the file name exported is defaulted to be a text format file
which is the same name of measurement file. Press the "Export"
to export the data of a measurement file in the U disk "ts_prj \
import" directory. The format of data exported is text ,and it can
be processed by transfer software on PC.
9.3.4 Format disk
After pressing „4.Format disk‟, a dialog box of „Warning!
Formatting will lose data. Export data first.‟ will appear on the
screen. Press „ENT‟ to continue formatting, otherwise „ESC‟ to
quit.
After formatting, all record in the instrument will disappear.
Please pay special attention to it.
9.3.5 Information of disk
A dialog box which displays the space available in unit
KB of the electrical disk in the instrument will appear on the
screen when entering the interface of “Information of disk”. The
measurement data of ten points approximately occupy 1KB.
9.3.6 Entering coordinates
See reference in 9.2.5
Filename: 455.MEA
Exported: 455.TXT
No.:
File Export
To Next Page
Loading...
