73
measurement, the deviated length(X), distance(Y) and altitude
difference(Z) are displayed on the screen.
The soft key „T.H‟ is used to reset the height of target. The
soft key „Mode‟ is used to switch between displaying „rN, rE, rZ‟
and displaying „SD, HD, VD‟ of the measured point from the
baseline projection point.
9.4.7 Roadway
See reference in 10. Roadway
9.5 Options
Take the „5.Mode of EDM‟ as an example:
Use keys▲▼to move the indicator „>‟ up and down to the
wanted opt. Press soft key „Enter‟ to confirm your choice. The
instrument will display box of „saved‟ and the setting remains
even after shutting down. Afterwards, the default EDM mode of
the instrument will be that of your choice until next time you
change the setting.
All the other settings under „Config‟ menu are similar to
„Mode of EDM‟. Please refer to the explanation above.
Notes: the „NEZ‟ or‟ ENZ‟ mode of coordinates are in
relation to the order of the exported coordinate only.
EDM option
>Sngl
Rept
Cont
Track
SetZ
To Next Page
Loading...
