EMI: FCC,CE
Installing USB Driver (WIN98SE only)
Please note if you are using Windows ME/2000/XP you do not need to install the driver.
For windows98SE please see below
Please do not plug the mp3 player into your computer before installing the driver
Insert the CD in to the CD-ROM drive of your PC.
Double click the setup.exe file. This will guide you through the process of installing the
driver.
Insert the USB cable to the MP3 player and your computer.
Your PC will recognize a new hardware, follow the instructions on the screen and this
will setup the mp3 player to be used on your computer
Storing Music MP3 files
Connect the USB cable to your PC and the headset
Upon connecting the USB cable, your computer will recognize a “Removable Drive”.
This can be confirmed by clicking on “my computer”, you will see MP3 player as one of
the Drives (E, F or G, etc.)
To copy music onto your mp3 Player, locate your music folder where your mp3 music
is stored on your computer.
Highlight the songs you require, then copy and paste into the Removable Drive (mp3
player)
Please note: Do not unplug the USB cable whilst you are downloading, this may cause
damage to your PC and the player
Playing MP3 music
Power on: press the ON button for more than 2 seconds, the green light will turn on
Pause: single press ON/OFF button
Stop: press the OFF button for more than 2 seconds, the green light will turn off
Next Track: single press the
>> Forward button
Previous Track: single press the << reverse button
Volume Up: press >> for more than 2 seconds
Volume Down: press << for more than 2 seconds
FM radio
Power on: turn FM/MP3 switch to FM
Search broadcasting station: short press the RUN button for search broadcasting station,
To Next Page
Loading...
Need help?
General