No steam is
generated
Coffee runs out
aroundthe edge of
the filter holder.
Coffee comes out too
slow or no coffee
comes out.
Water leakage on the
bottom of machine.
Machine is not
working,
he steam cannot
froth.
Steam nozzle clogged.
Watertank is empty.
Thesteamknob isclosedafter pressingthe steambutton.
Machine malfunctions,
Too much powder in the filter.
There is powder in the seal ring under group head.
mplementation of the above operation problems still exist.
coffeepowderis too fine, and cloggedfilter.
Filter holes are blocked.
The red silicone cover inside the water tank is not removed.
The steam knob is open.
Water tank is not inserted.
Driptray isfilled up.
Machine malfunctions.
Thepowercord isnot pluggedwell,
N TC is short circuit.
Machine malfunctions.
Steam indicator not light on.
The milk containeristoo big or theshapeisnot fit.
Llsed skimmed milk.
Clean steam nozzle.
Fill the tank with water and turn on the steam knob until
hot watercomesout continuouslyfrom the steampipe,
Now you can start to steam.
Turn the steam know anticlockwise to turn on the steam
function.
Please contact with the authorized service.
Turn off the machine and wait for it cool down, clean the
filter, then pourappropriatecoffeepowder.
Please contact with the authorized service.
Withthicker coffeepowder.
Brush / clean the filter.
Remove the red silicone cover inside the water tank.
Turn the steam knob clockwise to turn it off.
nsert the water tank in place,
Pleasecleanthe driptray.
Please contact with the authorized service.
Plugthe powercord into a wall outlet correctly,
Please contact with the authorized service.
Wait steam indicator lights on.
usehigh and narrowcup orgarland cup.
Use whole milk.
EN
* If you have not been able to solve the problem, contact customer support in your country.
E.Content of hazardous substances in the product
Accessory
Plastic
Hardware
Power Cord
Electrical device
Silicone parts
Package
Hazardous Substances
Plastic
O
o
O
O
O
o
(Hg)
O
O
O
o
O
O
O
O
o
(Cr(VI))
O
O
O
O
(PBBs)
O
O
O
O
O
(PBDEs)
O
O
O
O
o
This form is compiled in accordance with the provisions of SJ/T 11364.
O: ndicates that the content of the hazardoussubstance in all homogeneous materials of the part is within the limit requirement of
GB/T 26572.
x : It means that the content of the hazardous substance in at least one of the homogeneous materials of the part exceeds the limit
requirement of GBIT 26572.
8
To Next Page
Loading...